Shell and Coil Type Condenser
Condensing area: 0.5 to 50 m²
Design pressure: 0.6 to 4.0 MPa
Design temperature: -40°C to 200°C
Coil material: Copper or stainless steel
Cooling water flow: 5 to 100 m³/h
- Product Introduction
Company Team & Custom Production
Our company has 47 full-time workers. 7 of them have middle or senior technical titles. Customers ask us, "Can you make products based on our technical drawings or prototypes?" We answer, "Yes." This shell and coil type condenser has a special structure. It has a cylindrical shell. Inside the shell there is a spiral coil. The coil can be copper or stainless steel. Refrigerant or steam condenses inside the coil. Cooling water goes on the shell side. It takes the heat away. The condensing area is small, from 0.5 to 50 square meters.
Best Applications & Sample Policy
We do not give free samples. But we can make a small sample for you to test. This product works best for small cooling units. For example, display cases in supermarkets and small cold stores. Laboratories also use it for precision condensation because it is small and easy to control temperature. In the fine chemical industry, for small flow media like solvent recovery of only a few tens of kilograms per hour, this shell and coil type condenser works very well.
Technical Data Table
|
Parameter |
Value Range |
|
Condensing area |
0.5 to 50 m² |
|
Design pressure |
0.6 to 4.0 MPa |
|
Design temperature |
-40°C to 200°C |
|
Coil material |
Copper or stainless steel |
|
Cooling water flow |
5 to 100 m³/h |
Customer Example & Delivery
A university lab customer in China was doing a distillation experiment. The steam rate at the top of their column was only 5 kg per hour. They bought our product with 0.8 square meters of area. They used tap water for cooling. The unit met all their experiment needs. Customers ask, "What is the lead time for custom products?" We answer, "It depends on size and quantity. The fastest delivery for custom products is 30 days." Our senior technicians make the coils by hand or with a special bender. Export packing uses fumigation wooden cases. The coil is fixed without contact to the case to stop deformation. Payment: 40% in advance, 60% before shipment. We believe this shell and coil type condenser is the best solution for low flow and small space condensation jobs.
Hot Tags: shell and coil type condenser, China shell and coil type condenser manufacturers, suppliers, factory, condenser, Shell and Tube Heat Exchanger Condenser, Shell and Tube Water Cooled Condenser, Stainless Steel Heat Condenser, Tube Type Condenser, Water Cooled Surface Condenser
