Water Cooled Shell and Tube Condenser
Condensing area: 5 to 1500 m²
Design pressure: 0.25 to 2.5 MPa
Design temperature: -20°C to 150°C
Cooling water flow: 7.38 to 501.74 m³/h
Inlet water temperature: ≤ 32°C
- Product Introduction
Team & On-Time Delivery
Our company has 47 workers. 7 of them have middle or senior technical titles. They help customers with equipment selection and heat transfer calculations. Customers ask us, "How do you make sure you deliver on time?" We answer, "We make a delivery plan before we sign the order. We follow that plan strictly after the order starts." This water cooled shell and tube condenser is made specially for energy saving retrofit projects. Its water side flow channel is optimized. The water pressure drop is 15% to 20% lower than normal condensers. That means your cooling water pump uses less electricity.
CFD Optimization & Applications
We have our own R&D team. They used CFD simulation to improve the shape of the water chamber and the baffle arrangement. This reduces vortices and dead zones. That is how we lower the water resistance. This energy saving water cooled shell and tube condenser works best in industrial circulating water cooling systems. Many chemical plants have very large cooling water pumps. Their electricity bill is high. With our low resistance condenser, you can lower the pump head or close the valve a bit to reduce flow. Both ways save power. Large cooling compressor units get a higher COP (coefficient of performance) with this energy saving condenser. Steam condensation recovery in chemical production also saves a lot of electricity over time.
Technical Data Table
|
Parameter |
Value Range |
|
Condensing area |
5 to 1500 m² |
|
Design pressure |
0.25 to 2.5 MPa |
|
Design temperature |
-20°C to 150°C |
|
Cooling water flow |
7.38 to 501.74 m³/h |
|
Inlet water temperature |
≤ 32°C |
|
Water pressure drop |
15-20% lower than standard |
Customer Story & Discount
A refrigeration engineering customer in Vietnam used our energy saving water cooled shell and tube condenser for a cold store. Their cooling water pump was originally 15 kW. In real operation, only 11 kW was needed. Customers ask, "Do you give discounts for large orders?" We answer, "Yes." The energy saving model has a slightly higher price than the standard one. But the electricity savings pay back the difference in just a few months. Export packing uses fumigation wooden cases. We buy insurance from factory to loading port. Payment: 40% in advance, 60% before shipment. We believe this product is the most responsible choice for your long term operating costs.
Hot Tags: water cooled shell and tube condenser, China water cooled shell and tube condenser manufacturers, suppliers, factory, Fin and Tube Type Condenser, Industrial Shell and Tube Heat Exchanger, Plate and Tube Type Condenser, Shell and Tube Heat Exchanger Condenser, Tube in Shell Condenser, Tube in Tube Type Condenser
