Air Cooled Finned Tube Heat Exchanger
Heat transfer area: 10 – 500 m²
Design pressure: 0.6 – 2.5 MPa
Design temperature: -20°C to +200°C
Fan power: 0.75 – 30 kW
Rated air flow: 1,000 – 30,000 m³/h
- Product Introduction
No Water Needed for Cooling
Our Air Cooled Finned Tube Heat Exchanger uses fans to blow air over finned tubes. This cools the fluid inside the tubes. It does not need any cooling water. Our factory has over 10,000 m² of space. We have standard production buildings, a special R&D lab, a precision inspection center, and a finished goods storage area. Customers ask: "Do you provide warranty? How long?" We say: "18 months after arrival at your site." This Air Cooled Finned Tube Heat Exchanger is perfect for industrial equipment working in remote or dry areas.
Technical Parameters Table
|
Parameter |
Value/Range |
|
Heat transfer area |
10 – 500 m² |
|
Design pressure |
0.6 – 2.5 MPa |
|
Design temperature |
-20°C to +200°C |
|
Fan power |
0.75 – 30 kW |
|
Rated air flow |
1,000 – 30,000 m³/h |
|
Main materials |
Carbon steel (Q235B, Q345R), 304 SS, 316L SS, 2205 SS, Titanium TA2 |
Third-Party Inspection and Field Use
Customers ask: "Do you accept third-party inspection?" We say: "Yes." We often work with SGS, BV, and other international inspection companies. This product is used on compressors and generators working in open fields. Chemical plants also use it for tail gas and VOC condensation recovery. Many chemical wastewater treatment plants have no cooling water. Our unit cools VOC gas below its dew point. The gas turns into liquid for recovery. Food processing lines that need cooling without chilled water also use this product.
Client Success Story
We have a food factory client in Vietnam. Their candy production line had hot sugar syrup at 120°C. They needed to cool it down to 30°C. We used two large Air Cooled Finned Tube Heat Exchangers in series. It worked perfectly. Customers ask: "Do you have a dedicated after-sales team?" We say: "Yes." We send technicians for installation guidance. They ask: "Can you make from our drawings?" We say: "Yes. We support full non-standard customization. You can choose fan brand, motor protection rating, and fin tube material." Payment: 40% advance, 60% before shipment. Export packing uses fumigated wooden boxes and waterproof cloth. Fans are separately fixed to avoid damage from transport vibration. We believe our product is an ideal choice for water-scarce areas.
Hot Tags: air cooled finned tube heat exchanger, China air cooled finned tube heat exchanger manufacturers, suppliers, factory, Air Cooled Finned Tube Heat Exchanger, Air To Liquid Heat Exchanger, finned heat exchanger, Finned Shell and Tube Heat Exchanger, Louver Fin Heat Exchanger, Plate Fin Type Heat Exchanger
