Air To Liquid Heat Exchanger
Heat transfer area: 5 – 500 m²
Design pressure: 0.6 – 2.5 MPa
Design temperature: -20°C to +150°C
Rated air flow: 500 – 20,000 m³/h
Water flow: 5 – 100 m³/h
- Product Introduction
Save Water with Air Cooling
Our product works by using air to cool a liquid. Or it uses liquid to heat air. This is different from our liquid-to-liquid units. One side takes air. The other side takes water or oil. We are a member of China Pharmaceutical Equipment Association, China Chemical Equipment Association, and a Sinopec approved supplier. Customers ask: "Do you meet local environmental rules?" We say: "Yes." We have ISO14001 certification. This Air to Liquid Heat Exchanger is ideal for closed-loop cooling of industrial circulating water.
Technical Parameters Table
|
Parameter |
Value/Range |
|
Heat transfer area |
5 – 500 m² |
|
Design pressure |
0.6 – 2.5 MPa |
|
Design temperature |
-20°C to +150°C |
|
Rated air flow |
500 – 20,000 m³/h |
|
Water flow |
5 – 100 m³/h |
|
Main materials |
Carbon steel (Q235B, Q345R), 304 SS, 316L SS, 2205 SS, Titanium TA2 |
On-Time Delivery and Applications
Customers ask: "How do you ensure on-time delivery?" We say: "We make a delivery plan before order. We follow it strictly after order starts." Our factory has laser cutters and automatic welders. We make this Air to Liquid Heat Exchanger efficiently. Many factories use cooling towers for circulating water. But cooling towers lose water to evaporation and get dirt. Our unit is a closed system. Water does not get lost or polluted. It is also used for after-cooling of air compressors and pre-cooling for dryers. Compressed air from an air compressor is very hot. It must be cooled before entering the dryer. Our unit uses ambient air directly. No cooling water needed.
Client Success Story
We have a client in Turkey with an injection molding factory. Their hydraulic oil temperature often went above 80°C. This caused machine shutdowns. We added an product next to their oil tank. With a fan blowing, oil temperature dropped below 50°C. Customers ask: "What is the lead time for standard products?" We say: "20 days." They ask: "Do you give discounts for large orders?" We say: "Yes." Our monthly capacity is 50 units for spiral plate and similar for this product. Payment: 40% advance, 60% before shipment. Support EXW and FOB. We believe our Air to Liquid Heat Exchanger is the best choice when you have no cooling water or want to save water.
Hot Tags: air to liquid heat exchanger, China air to liquid heat exchanger manufacturers, suppliers, factory, Air Cooled Finned Tube Heat Exchanger, Fin Tube Condenser, Finned Double Pipe Heat Exchanger, finned heat exchanger, Finned Shell and Tube Heat Exchanger, Plate Fin Type Heat Exchanger
