Louver Fin Heat Exchanger
Heat transfer area: 0.5 – 50 m²
Design pressure: 1.0 – 3.0 MPa
Design temperature (standard): Up to 180°C (JB/T 11249-2012)
Fin pitch: 2.0 – 3.5 mm
Main materials: Carbon steel (Q235B, Q345R), 304 SS, 316L SS, 2205 SS, Titanium TA2
- Product Introduction
High Efficiency Air Cooling
Our Louver Fin Heat Exchanger uses a special fin structure. The louvers break the air boundary layer again and again. This makes heat exchange between air and fins more complete. We have 40+ full-time staff. Our team includes 7 professional technicians and 12 senior skilled workers. We hold ISO9001, ISO14001, and ISO18001 certifications. Customers ask us: "Do you have your own R&D team?" We say: "Yes, we do." Our R&D team works with Jiangnan University and Nanjing Tech University. They help us solve many heat exchange problems. This product works well for air cooling without water.
Technical Parameters Table
|
Parameter |
Value/Range |
|
Heat transfer area |
0.5 – 50 m² |
|
Design pressure |
1.0 – 3.0 MPa |
|
Design temperature (standard) |
Up to 180°C (JB/T 11249-2012) |
|
Fin pitch |
2.0 – 3.5 mm |
|
Main materials |
Carbon steel (Q235B, Q345R), 304 SS, 316L SS, 2205 SS, Titanium TA2 |
|
Rated air flow |
100 – 10,000 m³/h |
Reliable Production and Delivery
Customers ask: "How do you ensure on-time delivery?" We answer: "We make a delivery plan before order. We follow it strictly after order starts." Our factory covers 10,000 m². We have laser cutters and automatic welders. Every fin is stamped and checked for size. Customers ask: "Do you provide warranty? How long?" We say: "18 months after arrival at your site." We have a client in Vietnam. They use our Louver Fin Heat Exchanger after their air compressor. The air temperature is 120°C. Our product cools it below 40°C for the dryer. This solved their problem. This product also works for car radiators, AC outdoor units, and electronic cabinet cooling.
Sample and Order Details
We ask customers: "Can you provide a sample before bulk order?" We say: "Yes, we can." The sample is not free. But we can make one small unit for your test. Custom sample lead time depends on size and quantity. Our minimum order quantity is 1 unit. You can mix different models in one order. Export packing uses fumigated wooden boxes and waterproof cloth. We buy domestic insurance from our factory to port of loading. We believe our Louver Fin Heat Exchanger gives you higher heat transfer efficiency on the air side. It is a great choice when you have no cooling water and only air.
Hot Tags: louver fin heat exchanger, China louver fin heat exchanger manufacturers, suppliers, factory, Air Cooled Finned Tube Heat Exchanger, Air To Liquid Heat Exchanger, finned heat exchanger, Finned Shell and Tube Heat Exchanger, Louver Fin Heat Exchanger, Spiral Fin Tube Heat Exchanger
