Fin Tube Condenser
Condensing area: 5 – 150 m²
Design pressure (standard): 1.0 – 2.5 MPa (small units use 1.0 MPa)
Design temperature: -20°C to +150°C (condensing end usually below 65°C)
Rated condensing capacity: 100 – 20,000 kg/h
Fan power: 1.5 – 25 kW
- Product Introduction
Core Component for Refrigeration
Our product uses fans to blow air over finned tubes. This turns steam or refrigerant vapor inside the tubes into liquid. The condensing area is 5 to 150 m². We have 47 full-time employees. Our team includes 7 professional technicians, 12 senior managers, and 12 senior skilled workers. Customers ask: "How do you ensure on-time delivery?" We say: "We make a delivery plan before order. We follow it strictly after order starts." This product is a key part of air-cooled refrigeration systems.
Technical Parameters Table
|
Parameter |
Value/Range |
|
Condensing area |
5 – 150 m² |
|
Design pressure (standard) |
1.0 – 2.5 MPa (small units use 1.0 MPa) |
|
Design temperature |
-20°C to +150°C (condensing end usually below 65°C) |
|
Rated condensing capacity |
100 – 20,000 kg/h |
|
Fan power |
1.5 – 25 kW |
|
Main materials |
Carbon steel (Q235B, Q345R), 304 SS, 316L SS, 2205 SS, Titanium TA2, plus copper tube with aluminum fin |
Environment Compliance and Common Uses
Customers ask: "Do you meet local environmental rules?" We say: "Yes." The refrigerants we use with our Fin Tube Condenser are all environment-friendly. The most common use is in central air conditioning and cold storage refrigeration units. The outdoor unit of an AC has a product. Petrochemical plants use it for steam condensation recovery. For example, water vapor from a distillation tower condenses back into water for reuse. Food and beverage plants also use it to condense and discharge steam from sterilizers.
Client Success Story and Order Details
We supplied our Fin Tube Condenser for a cold storage project in Pakistan. The cold storage temperature was -18°C. The refrigeration system's condensing temperature was 45°C. Our product ran stably at 40°C ambient temperature. Customers ask: "What is the lead time for standard products?" We say: "20 days." They ask: "What about custom products?" We say: "30 days." We support mixed orders. For example, you may need both a product and a finned shell and tube unit. We can ship them together. Export packing uses fumigated wooden boxes. Copper tubes get a protective coat of anti-rust oil. We buy domestic insurance from factory to port of loading. We believe our Fin Tube Condenser is the core part of any air-cooled refrigeration system. Our product helps your refrigeration equipment run efficiently.
Hot Tags: fin tube condenser, China fin tube condenser manufacturers, suppliers, factory, Air Cooled Finned Tube Heat Exchanger, Fin Tube Condenser, finned heat exchanger, Finned Shell and Tube Heat Exchanger, Plate Fin Type Heat Exchanger, Spiral Fin Tube Heat Exchanger
